
Electronic pH Meter
- Low stock - 2 items left
- Inventory on the way
What is an Electronic pH Meter?
The Milwaukee PH600 is an affordable portable pH meter that gets the job done.
If you work with large water containers or need a higher level of precision and easier calibration, you might consider the PRO pH meter.
It has an accuracy of ± 0.1 pH and the scale ranges from 0.0 to 14.0. It comes with a protection case, calibration screwdriver, batteries and instructions.
Why choose it?
You are tired of inaccurate readings from your basic old school liquid pH test and not't quite need a Pro meter yet.
How to use it?
- Slide the switch ON at the top
- Remove the cap
- Dip it in the solution (can be clipped on the side of a bucket)
- Measure
- Put the cover back on
- Slide the switch OFF
How to calibrate it?
- Remove the electrode cover
- Insert the electrode in a container or small glass filled with 7.01 calibration buffer solution
- Rotate the scre in the back with the small screw driver provided with the kit until its reaches 7.0
How to clean it?
- Remove the electrode cover
- Insert the electrode in a container or small glass filled with cleaning solution for pH and ORP electrodes
- Let is rest for a few seconds until the reading stabilizes
- Remove the electrode
- Place the protection cap back on to the electrode
How to store it?
- Rinse the electrode in a glass of water
- Put a little storage solution for pH testers in the cap before you close it, so the electrode stays wet
- Place the protection cap back on the electrode
Scale (0.0 to 14.0 pH)
Resolution (pH 0.1)
Accuracy (± 0.1 pH)
Calibration (manual, 1 point)
Terms of use (from 0 to 50 ° C)
Type Batteries (3x1.5V alkaline)
Battery life (700 hours)
Dimensions (165x30x24 mm)
Weight (85 g)